| |
Specification |
LT-800-072 |
LT-800-216 |
| RF |
RF Frequency Range |
72.025 - 75.950 MHz |
216.025 - 216.975 MHz |
| Number of Channels |
57 (17 wide, 40 narrow) |
57 (19 wide, 38 narrow) |
| Frequency Accuracy |
± .005% stability 0° to 50°C (32° to 122° F) |
| Transmitter Stability |
50 PPM |
| Transmitter Range |
3,000 ft (914.4m) |
| Output Power |
8,000uV at 3m (20mW) |
100mW (Max allowed by FCC) |
| Antenna |
Several available. See http://SimultaneousEquipment.com for details |
| Antenna Connector |
Reverse BNC |
BNC |
| Compliance |
FCC Part 15, Industry Canada |
 |
| Audio |
** All system specifications are wireless end-to-end |
| System Frequency Response |
50Hz - 15kHz (±3dB) |
63Hz - 10kHz (±3dB) |
| System Signal to Noise Ratio (A-weighted) |
SQ enabled: 80dB; SQ disabled 60dB |
SQ enabled: 80dB; SQ disabled 50dB |
| System Distortion |
<2% total harmonic distortion (THD) at 80% deviation |
| Audio Input 1 |
Rear panel. Female–XLR and ¼ in combo connector, balanced, 0/-55dBu (microphone/line) nominal input level adjustable, -30/+21dBu (microphone/line) maximum, impedance 1k/20k Ohms (line/microphone) |
| Audio Input 2 |
Rear panel. One Phono connector, unbalanced, -10/+10dBu (line/speaker) nominal input level adjustable, +30dBu maximum, impedance 100k Ohms |
| Combined Audio Output (Mix) |
Rear panel. One Phono connector, unbalanced, 0dBu nominal output level,
+19dBu maximum, impedance 10 Ohms. |
| Headphone Output |
Front panel. One 3.5mm connector, unbalanced, adjustable output level,
+14dBu 250mW, maximum, impedance 32 Ohms. |
|
| Controls |
RF Power Selection |
Rear panel. Full, ½, ¼ (see "Output Power" above). |
| Set-up Controls |
Front Panel. Input level, mix level (modulation), contour equalization |
| User Controls |
RF power, test tone, channel UP and DOWN,
Input 1: line or microphone level, Input 2: speaker or line level. |
| Programming |
Channel selection can be locked by holding the
UP and DOWN button 5 se |
|
| Indicators |
Input VU Meter |
Dual Ten step LED (eight green, two red) |
| Mix VU Meter |
Ten step LED (eight green, two red) |
| RF Power |
Four step green LED |
| Power |
Green LED illuminates when the unit is powered up |
| LCD Display |
Channel and lock status |
| Test Tone |
Red LED illuminates when test tone enabled |
|
| Power |
Power Supply Type |
In-line power supply, Listen part number LA-201 |
| Power Supply Input |
120VAC, 60 Hz, 19 watts (maximum continuous) |
| Power Supply Output |
15VAC, 1A |
| Power Supply Connector |
.02 in OD x .01in ID (5.0mm x 2.5mm), barrel type |
| Compliance |
UL Listed |
|
| Physical |
Dimensions |
8.0 in x 8.0 in x 7.75 in WxDxH (20.3cm x 20.cm x 4.45cm) |
| |
Unit Weight |
3.0 lbs (1.4kg) |
| |
Unit Weight with LA-201 Power Supply |
4.4 lbs (2.0kg) |
| |
Shipping Weight |
5.0 lbs (2.3 kg) |
| |
Rack Mounting |
½ rack unit (RU) |
| |
|
|
| Environmental |
Temperature - Operation |
-10° to +40°C (14° to 104°F) |
| |
Temperature - Storage |
-20° to +50°C (-4° to 122° F) |
| |
Humidity |
0 to 95% relative humidity, non-condensing |
|
LT-800 simultaneous interpretation transmitter specifications
